-
2 Attachment(s)
Attachment 11286Attachment 11287oh yeah, drilled and tapped you're looking at about 1/8" to 3/16'" on each side... the bezel wall is 1/16" thick so use that as the reference size.
**EDIT** its a lot closer to 1/8" on each side than 3/16"
-
Amazeballs. Absolutely stellar. Thanks again Cakira.
-
no problem, just glad to be able to help
-
2 Attachment(s)
I did a similar things using a piece of PVC on my first build. I needed clearance for the switches and this was the most economical solution I could find. It doesn't look as good as yours, but it works.Attachment 11291Attachment 11292