View RSS Feed


Crystal Chamber Pt. II

Rate this Entry
Hello again...

I spent the afternoon custom-making a crystal for the chamber. Took a piece of clear acrylic and put it to the grinding wheel. There's some "gunk" on the edges that I need to clean off (anyone know how to polish acrylic??). Otherwise, It's about 1 1/2" long and about 1/2" in diameter. It fits nicely into my chamber, and lights up nicely... Still not as bright as I'd like it to be though...

Album Image #1
Album Image #2

Again, comments welcome! Thanks for looking!

Submit "Crystal Chamber Pt. II" to Digg Submit "Crystal Chamber Pt. II" to Submit "Crystal Chamber Pt. II" to StumbleUpon Submit "Crystal Chamber Pt. II" to Google

Updated 02-20-2011 at 07:01 PM by captain_mills

Tags: None Add / Edit Tags


  1. dgdve's Avatar
    They polish acrylic (the thick kind like the MR display cases) with the diamond dusted wheels(the cheaper way is flaming edges).. I dont know about that but google-fu will help where I have left off

    Also I always use brass stock tube for my crystal chambers with 2 dummy posts (this allows you to hide the wires in those tubes).. looking good so far