Modular Hilt Systems

**Strydur** · 03-26-2006, 11:27 PM

Post MHS saber pics here. Any posts with text besides a brief description will be deleted.

Tim
The Custom Saber Shop

**Corbin_Das** · 04-02-2006, 04:38 PM

And a red bladed saber staff:

Corbin Das

Corbin@CorbinsComponents.com

**Firebird21** · 04-05-2006, 09:53 AM

This one is nothing special, but it is a good depiction of Stock TCSS parts. It’s just too bad that the new ribbed sections and emitter designs came out after I ordered.

This is an LED MHS Starter kit with the “Heiland head piece replica”.
I drilled the holes in the pommel for the speaker from a “Hasbro Obi Wan with The Force” sound board. I had to trim the sides of the speaker to fit into the hilt, and it fits perfectly into the hilt up to the end of the treads. So I used some black electrical tape to keep the Pommel from crushing the speaker.

Have you read your Thread Index today?
FAQ

Official Designated TCSS Jester!

**Jedi Ranger** · 04-11-2006, 03:51 AM

Here is my latest LED MHS hilt. I'd like to publicly thank Tim for the custom work he was gracious enough to do for me - small v-grooves in a hilt section and a standard extension section.

I installed a 3W "Royal Blue" LED.

Main (exterior) parts: MHS main hilt (style #1), MHS extension (style #1), MHS LED emitter (style #1), MHS pommel (style #1), and a severely dremeled section of chrome 1.5" sink pipe.

The comparison shot is with an unmodded Ep.III Anakin MR FFX. Cameras aren't very good at properly capturing ignited lightsabers. [

][V] The MR-FX isn't that bright, and the LED is much more evenly lit. Oh well.

http://www.members.shaw.ca/Dahak/</center>

**UltraSWG** · 04-20-2006, 02:57 AM

Ultra Saber S5 modified by customer
White Luxeon V with yellow filter, customer said it's brighter than any of her 3watt sabers even with the filter. No thermal issues with TCSS MHS hilt.

http://www.ultrasabers.com
Corbin|Strydur|Ultra
The Holy Luxeon Trinity

**Daj Nallig** · 05-19-2006, 03:45 PM

My first saber. mhs kit with 2.5" extension

**todd4566** · 05-24-2006, 08:02 PM

Here's my MHS w/ a green 5w Luxeon. I'm currently using a 6v pack to power it, so I expect it to get a little brighter w/ more juice. [

] *MR Luke is the in these pics for comparison.

medium light

**Do-Clo** · 06-18-2006, 02:03 PM

1 watt Luxeon cyan (looks green to me) with a Micropuck led driver powered by 2 AA batteries. The hilt is a mhs tappered blade holder with a allen screw to hold the blade and a mhs ribbed section then a section of sink tube and a ribbed mhs pommel. The blade is poly carbonate 1 inch diameter 40 incles long with cordin's double wrap blade film. Picture of blade was taken during normal lighting in the room.

</center>
<center>Darth Technous Sith Lord</center>
<center>Give yourself to the Dark Side</center>