It found on chip1stop.com. Thank you for information.Originally Posted by Azmaria Dei
But, my MJE2955T working fine also.
It found on chip1stop.com. Thank you for information.
But, my MJE2955T working fine also.
so I guess I will buy this one. It costs little over 1$
I was searching czech Internet if there will be some momentary switch fitting the hilt hole but I found only oneso I donīt know where to get the momentary switch.
so I bought transistor and a momentary switch yesterday. I bought two MJE2955T transistors and 2 momentary switches(I will use only one transistor and mom switch, rest of will be spare parts). It cost exactly 50 CZK which means that cost me 2,8$ for all
but only problem is that that momentary switch has max current 2 or 3 amperes. Do you think it is enough for led and soundboard connected together?
Last edited by Malakay; 02-19-2011 at 02:45 AM.
This is my works with MJE2955T and Hasbro electric saber board.
Last edited by RattleHornet; 02-19-2011 at 05:24 PM.
wow great
Yes it will work fine.
Click here to learn all about me!
The Shoutbox: The only place you can double post!
Anybody who spells it Lightsabre is dyslexic
"Yeah, if I had Skotts face I'd hit it too" ~ Fenderbender
"You didn't buy a toy saber just to break it. You bought an economy sound card with a really complicated wrapping scheme." ~ Silver Serpent
So my force fx saber arrived, and i found that the soundboard is described here on the forum.
In this picture is described wiring, but I dont know what connection to use - the one i posted before with tip42 or MJE2955t transistor or this on picture.
Give me an advice please
That isn't a force FX board, that is an econonmy board.
There are force FX wiring diagrams in a stickied thread in the cutaway views & wiring diagrams section.
Click here to learn all about me!
The Shoutbox: The only place you can double post!
Anybody who spells it Lightsabre is dyslexic
"Yeah, if I had Skotts face I'd hit it too" ~ Fenderbender
"You didn't buy a toy saber just to break it. You bought an economy sound card with a really complicated wrapping scheme." ~ Silver Serpent
it is force action saber.it is possible it is econo board.i found wiring diagram, but i have to buy a relay
One more thing - I found wiring for cheapo soundboard - but there is a relay. I was thinking - can I wire it according to this diagram, but connect the LED on LED+ and LED- wires directly without using a relay? soundboard gives 3,75 V to its default leds. I have Seoul P4 blue and Luxeon Rebel Star Cyan (3,4V , 700mA) i found here on the forum that these leds can be connected directly without a resistor. What do you think?
Posting Permissions
Reply With Quote
Bookmarks