My First MHS Hilt with MRFX board & reverse sound (VERY IMAGE HEAVY)

**Rafalema** · 01-04-2010, 07:36 AM

Today I got the soundboard from mail and wired it up!

The accent LED on the pommel is activated if Kill key is not on place.

You can see the reverse sound holes in 7th and 8th pic. They are hidden under rubber O-ring on the v-grooved grip.

These are the specs:
Red Luxeon III with JST connectors for quick change
MRFX Jedi Board
4 x AA battery pack
Wrong switch (I accidentally ordered momentary

)
1 Accent LED

Pics:
Whole thingy

Blade Holder pic

Whole thingy 2 (You can see in this pic that the switch is too small for that hole.)

The whole thingy, behind

With TCSS Corbin Battle Blade 34 inch in non-lit room

Blade shot 2

Self drilled Reverse Sound holes 1

Self drilled Reverse Sound holes 2

Video uploaded: http://www.youtube.com/watch?v=JkM_OBdQFhs

**Shadar Al'Niende** · 01-04-2010, 08:00 AM

Very nice, and much better on the pic size

I like the way you wired up the accent with the board...

**Rafalema** · 01-04-2010, 08:01 AM

The accent LED was pretty easy, but it looks very good

**sekrogue1985** · 01-04-2010, 08:32 AM

nice looking

**Dakarn** · 01-04-2010, 09:11 AM

Very nice! Like where you have the accent LED and the blade is nice and bright too.

**Alcfalath** · 01-04-2010, 01:19 PM

Looks pretty good, but you are going to have problems with the switch and the covertec clip on the same side, such as many accidental activations when belt hanging.

My suggestion if you can would be to put a button head screw where the covertec is at the present point in time, then move the covertec somewhere not in line with the main switch.

**Sidd** · 01-04-2010, 01:28 PM

DO you have any pictures of the wiring

**Rhyen Skytracker** · 01-04-2010, 02:27 PM

Looks great but I agree with Alcfalath, you will have problems with the switch and convertec wheel on the same side, especially that switch. You may not have a problem if you use a AV switch or maybe even a guarded switch.