Many have heard rumors of this project for months now, and these were released upon the community today. They are the K3GR1's (a limited JSSDC run of sabers used for the second JSSDC sabersmith challenge and were machined by Acerocket.) Here is my entry in all her glory, "The K3GR1 Aqua"
I wanted to seriously blinkify this one and since my electronics skills have progressed light years since the G-Flex Challenge, I decided to see how many cool light-up doo dads I could incorporate into the coolest hilt ever. The LED display was used in one previous saber to the best of my knowledge (MC's Rantux..I think) and I always wanted to do one, but most (could also read that as "all") of my CF sabers have been for clients, I have never gotten around to it. It accounts for 8 LEDs worth of connections. I also wanted to frame it in the hilt so I built a random bargraph around it (4 more LEDs) with Aqua and Violet 5mm LEDs. I finished it off with the Aqua Crystal Pommel and the purple Antivandal switch LED for a total of 14 accent LEDs (my most to date).
I have included the unabridged original post from JSSDC.
The Particulars:
CF 4.2 with the following fonts:
1. EP I (V4)
2. EP II (lightside)
3. Dooku EP II (by Sekrogue1985)
4. EP IV
5. EP V SE Lightside
6. SW EP VI (v4)
Luxeon V BIN3 Cyan main LED
(4) Aqua 5mm HO LEDs
(2) Violet 5mm HO LEDs
( LED Random Display Module
Purple lighted Antivandal switch
RS Aux mom switch
2.1mm Kill/Recharge
All switches in AoF custom Box
7.4V (CR123) Li-ion "stick" battery pack
TCSS HO Speaker
Trans Gold PC
Window in "emitter box"
And...
LDM's K3GR1 #1 made by Acerocket
The Videos:
The First Fire up:
The Final Saber:
The Glam Shots:
The Build:
A Final Note: The QD's that you see in the pix are gonzo..no room inside, so I ditched them and everything is connected permanently now.
For those of you who want a "chuckle" I leave you with this final thought:
Bookmarks