Results 1 to 3 of 3

Thread: Upgrade Rebel Star to Tri-Cree

  1. #1

    Default Upgrade Rebel Star to Tri-Cree

    I want to get a brighter blade for my older saber.

    Currently running:

    NBv4
    Rebel Star Royal Blue
    18650 3.7V 2600mAh

    Is it possible to upgrade to a Tri-Cree XP-E2 B/B/W? How much modification would I need to do?

    Is there a better option?

  2. #2

    Default

    Should be doable, would need a PEx for the 3rd channel, a tri-cree lens, and the appropriate resistors for the LEDs.

    NBv4 is a dated board at this point, if you want smoothswing but don't want to break the bank, you could upgrade to a GHv3. However if the board is still working for you, it'll handle a tri-cree.
    Last edited by RavenXp; 05-10-2023 at 07:04 AM.

  3. #3

    Default

    Thank you for the quick response and suggestions.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •