Just double checking my wiring

[BrutalMaz]

So Im building my first saber and I was hoping someone could double check my wiring diagram. (excuse my crappy photoshop skills) now Im pretty confident in soldering due to the fact I worked on airsoft guns at a shop as the "tech" so I had to work with small wiring all day anyway. But I was just wanting to double check I had done my homework right in this wiring system. Im opting out for sound since first saber and to budget a little better.

my goal is to use a momentary switch with the buckpuck which is why I added the switch converter.


b9c765d3e72733f1777c42fe90b8c59b.jpg

Thanks!!

[BrutalMaz]

So either I did it right or my crappy photoshop diagram confused people lol

[Tom Tilmon]

I'm not familiar with the buckpuck, or I'd help you. I see your post, but I'll wait for other "stunt" installers to weigh in. This looks more complex than wiring a CF9! There will be someone along that can give you advice.

Tom

[Silver Serpent]

It looks like you've got the recharge port polarity backwards. Typically the red (+) wires go to the shared terminal, and the black (-) wires are on the two switched terminals.

The logic for the rest of your diagram looks fine, assuming you connect everything to the momentary switch converter properly.