Wiring the LED in an 8-pin illuminated switch?

[Strydur]

If it is a latching switch that will not matter.

I know the OP said momentary but it looks like a latching one to me.

[Mah Al Ibara]

If it is a latching switch that will not matter.

I know the OP said momentary but it looks like a latching one to me.

Tim, you might be right! I don't have the original packaging. I will test it.

[Mah Al Ibara]

I was sure that Tim was right and these were latching, but when I wired everything up, they wouldn't work with the default Crystal Focus setting of latching. (The saber stayed on and would only turn off for a split second before starting up again.) When I changed the settings to momentary, the switch worked fine. But though I wired up the LED to the first accent LED pad on the CF, it didn't light up. I need to check the settings on the micro SD and also make sure my bridge is actually bridged and the other wires are solid.