so i painted some plastic pieces in a conversion im doing, ive done about 3 coats. Do i still need to do some clear finish? i want it to be Matte not shiny
so i painted some plastic pieces in a conversion im doing, ive done about 3 coats. Do i still need to do some clear finish? i want it to be Matte not shiny
My first soldering adventure ended in success.
Man when that light first came on , wow
I burnt my hand once when i was first starting, but i take it as part of making a lightsaber fit for a sith
heres some pictures of my first time work (taken with my phone)
im using quick disconnects incase i ever want to change the color
just be sure you isolate everything and you should be just fine.. its lookin good.. I'm getting excited for ya :P
"Yes Lord Vader, and I too have a gift... for you.."Originally Posted by Gin Malinko
"There is no good or evil, no black or white.. There is only.. Perspective"
Your wires soldered to the LED are stripped back a bit too far. Make sure the bare wires aren't touching the heat sink. Ideally, you don't want the bare wires even touching the LED star, itself, just the solder pads on the star.
In order to see the Light,
you must sometimes risk the Dark.
TCSS MODERATOR
BLUE 8 Ready to ROCK and ROLL!
just an added note on this.
I vote dgdve as the site's motivational speaker. haha
Seconded! (lol)
"Yes Lord Vader, and I too have a gift... for you.."
"There is no good or evil, no black or white.. There is only.. Perspective"
Posting Permissions
Reply With Quote
Bookmarks