yes the guarded switches extend almost all way through inside, just a lil shy of hitting the other inside wall. so you got to protect the switch from say the batt pack sliding up and shearing the switch off.
yes the guarded switches extend almost all way through inside, just a lil shy of hitting the other inside wall. so you got to protect the switch from say the batt pack sliding up and shearing the switch off.
Lan-Ed-Tul
The Brotherhood Of The Sith
SL 6208 501st legion & SLD
TK-6208
You dont know the POWER, of the dark side.......
Proud member of the FSM!!
I don't know...
If your NEW to TCSS READ HERE!! >>>>> http://forums.thecustomsabershop.com...d=1#post108682
I don't know...
If your NEW to TCSS READ HERE!! >>>>> http://forums.thecustomsabershop.com...d=1#post108682
I don't know...
If your NEW to TCSS READ HERE!! >>>>> http://forums.thecustomsabershop.com...d=1#post108682
Well sence space looks like an issue I would use a congrol box of some sort and use smaller switches.
Any intelligent fool can make things bigger and more complex. - Albert Einstein
Reaganomics not Obamanomics
Hmm, I've now decided I'm using a 4AAA pack, I'll put it in the Ribbed section.
If i have the switch right next to the o-rings, will that give me the space for the corbin driver?
If all else fails, I'll go with Hasids idea, but instead of a box I'll get a MPP clamp and stick a tactile switch out of the store in there
I don't know...
If your NEW to TCSS READ HERE!! >>>>> http://forums.thecustomsabershop.com...d=1#post108682
Well the corbin board will only fit in normal mhs sections and requires moderate sanding on the sides to fit. I forget the length but its possible that it will fit in between the ribbed sections threads and your switch but it may be a tight fit.
Maybe tim could put the drivers dimensions in the product description.
Any intelligent fool can make things bigger and more complex. - Albert Einstein
Reaganomics not Obamanomics
Its already in there "Dimensions are 1-1/4" x 1-5/8""
I don't know...
If your NEW to TCSS READ HERE!! >>>>> http://forums.thecustomsabershop.com...d=1#post108682
is it?
*looks*
I guess it is....they wernt there when I ordered mine a while back.
Any intelligent fool can make things bigger and more complex. - Albert Einstein
Reaganomics not Obamanomics
Bookmarks