Originally Posted by
Dregan
First off,, you need a real steady hand soldering those 7135 driver boards. You have about a milimeter or so of clearance. This is how I practiced to solder a Rebel, incidentally...
Second, I thought all Kai had for those boards left were multi-finction - as in click once for 100%, click again gor 50%, etc. I get mine from DealExtreme.com, as they have more of a selection, and I go through the 350 mAh ones somewhat regularly in the spring.
After that, you can run the MR board's output to a relay, and run the driver off that, just like a K2 in a Mace conversion. That way, you could put almost any LED in there, depending on which driver you use.
Bookmarks