-
inverter
i was reading the description of the 4khz inverter and was wondering if it has a failsafe on it that provents it from being blown up when powered on without the blade attatched.
-thanks
-andy
-
curtainguy,
I haven't read on it, but I'm pretty sure it doesn't. What you need to do is wire-up a 1 MOhm resistor in paralel with the blade. That way, even if the blade is disconnected, there is still a load on the circuit. Again, look at Tim's tutorials, they are great.
Born of Sith, seduced by the light side.
-
Owner of the Custom Saber shop
Until the manufacturer actually tells me otherwise, I do not guarantee they will not blow if turned on without a load. But, that being said I have turned my test sabers on many times and have never blown a inverter that I sell.
Tim
The Custom Saber Shop
-
-
Owner of the Custom Saber shop
Yup..still trying to find out from the manufacturer..will let you all know if I do.
Tim
The Custom Saber Shop
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks