-
so the kit to make an EL blade comes with 17' of EL wire. would it be pretty much the same to use 10 ft. of 5mm wire instead?
-
the 5 mm wire is probably too thick to work. it wouldn't crimp enough or leave room for enough strands to look good. I've used it before in other projects, and it just isn't that much brighter than the 2.5.
-
Owner of the Custom Saber shop
The 5mm just has a thicker outer covering. It does not bend as well and you would be lucky to get 2 strands where 5 strands of the 2.5 would fit.
Tim
The Custom Saber Shop
-
i used 5mm in my first blade because i misunderstood jedi loreen's tutorial. it sucks. you can get one strand in, no more. you can get another strand in, but it will only go in about 10 inches. stick with 2.5mm, you will end up with a much brighter blade.
i am a nerd, if you don't like it, i will cut you with my lightsaber
-
thanks for the input guys. I guess this means I'll be using the 2.5 wire.
-
Council Member
Jedi Council Member
-
guess he could try it in a 1 inch blade and make the reducer for the mono jack plug. lol
You dont know the POWER, of the dark side...
-
-
hey, jedi loreen, nice to see you posting again, havent heard from you in awhile. things ok on your end?
You dont know the POWER, of the dark side...
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks