-
Sith Lord
Ok if I understand this correctly then would it be possable to cut the blade off as close to the hilt as possable then take some needle nose pliers and push the pin up and out.
-
If the kit is anything like Yodas was, then why dont we just drill and tap for the 8.32 screw in there. If I drill thru the pin then we wouldnt have to worry about cutting the blade or anything.
Blue 4 "Im hit!"
-
Sith Lord
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks