-
red k2 ?
Do they make a red k2 high current led?
I would like to use the mace MR board to run my new saber, but make it so I can use the quick change system to switch colors.
Or would it be possible to place a quick connector on the inputs to the relay (from the MR board) to power just the 3watt red and have the relay power the K2's (royal blue and green) when they are connected.
I don't know did any of that make sense?
-
-
-
just a guess
Sorry, I may not have been clear on my second point. There would be two quick connects one on the output of the relay for the K2's and one on the input of the relay for the red lux III. When activated the relay would come on but nothing would be on it's outputs if you put the red luxIII in on the connector before the relay. Then if you want to put a K2 in, make sure you put it on the connector from the relays outputs.
This would only work if the relay is not damaged by not have anything connected to the outputs, and would require you to label the two connectors.
Let me know what you guys think, will it work?
-
-
-
-
ok
Ok, Thank you all for the input. I'll be doing this conversion soon so I'll put up pics when I can.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks