Well no matter what im going to convert my maul so im gonn a order my leds and stuff today,then I will get a conversion kit from you Tim when you have them,if cd dosen't make mine by then.I cant wait!
Well no matter what im going to convert my maul so im gonn a order my leds and stuff today,then I will get a conversion kit from you Tim when you have them,if cd dosen't make mine by then.I cant wait!
"aaah... general kenobi.... you are a bold one."-general grievous
http://starwars.wikia.com/wiki/Qymaen_jai_sheelal
Proud owner of the first two Darth Maul conversion kits! Thanks Tim!
really, so how about the Yoda?Originally Posted by Strydur
and lan, yes those hold the blade in. they are also metric so you will need a metric alen wrench. hey also will she do alot of twirling with it? If so you may want to reverse the switch so it won't shut off as easy. I seen someone did that but I already had mine done and I wasn't takin it apart again. good luck.
BLUE 3- Ready
I will get some yodas as soon as they are available to me.
Tim
The Custom Saber Shop
it was hajime who first did the obi wan with a aluminum blade holder. his pics are like 4 posts from the bottom. http://www.thecustomsabershop.com/fo...?t=702&start=0
Aluke123 on every other forum - Old grumpy moderator here
Thread Index, The Saber Building Dictionary, and The Basic Saber-Build Tutorial - Read Them!
Like Tim said its easy to take apart.I would wait on his kit to make it an easy convert.
well crud, i wished i knew that before hand. i paid 92 total for a mace, shippin and all, how much would you of gotten a mace for, tim?
ive seen a few obi's on ebay goin for just under the 105 mark.
and the mauls, i seen a couple go for 150 to 170 there too.
and those parts arrived today from tim, dang man, that was super fast. 2 days, a speed record.
thanks for the metric allen tip on the collar screws, do you have to use all 3 to tighten down and loosen the blade? or just one of them?
Lan-Ed-Tul
The Brotherhood Of The Sith
SL 6208 501st legion & SLD
TK-6208
You dont know the POWER, of the dark side.......
Proud member of the FSM!!
you might be able to only use one. I would atleast have the othe 2 right close though.
edit: oh make sure you tap the holes for those, I tried to just push through and recut the threads and ended up messin it up so the blade is real hard to get in and out.
BLUE 3- Ready
Just sand the inside of the holder where the hole has burrs.Originally Posted by vortextwist
'I won't kill you, but I don't have to save you.'
No the blade holder for his mace bent when he went to cut the threads in the blade holder with a set screw like the faq suggests you do.
thanks for the tips, i think i will have to get a tap, im not sure if i have one that size, but i will see.
i might try running 2 of them flush on inside, and use one for blade hold, and see if its gonna stay, im thinking tho, with them that small, i may have to have her use 2 to hold it good.
Lan-Ed-Tul
The Brotherhood Of The Sith
SL 6208 501st legion & SLD
TK-6208
You dont know the POWER, of the dark side.......
Proud member of the FSM!!
Bookmarks