![]() |
|
#1
|
||||
|
||||
|
Does an EL lightsaber inverter ever make a loud whinning sound when its on because ive heard about many cases of that happening.
__________________
http://thecustomsabershop.com/sabers...ngingsaber.gif |
|
#2
|
||||
|
|
||||
|
Loud is relative.
I don't think so. And that is even pushing it at 18volts.
__________________
Red 5 "Move Dangit! I gots Snitz to blow up!"
|
|
#3
|
||||
|
||||
|
Some do, some don't whine.
I have some I've bought from other sources, before this place existed. For example, the one I have from Lightech Industries that's in my first hardware EL saber that I built on '02 does whine a bit. The one in my older Parks M2 whines, but the one in my newer Parks Fusion does not. I have a 4kHz inverter from this store and have played with it, but haven't mounted it in anything yet, but I don't recall hearing anything from it when I've powered it up with 9 and 12V. I haven't tried it at 18V yet.
__________________
In order to see the Light, you must sometimes risk the Dark. ![]() ![]() BLUE 8 Ready to ROCK and ROLL! -OFFICIAL JSSDC BMF Last edited by Jedi-Loreen; 10-15-2009 at 01:52 AM. |
|
#4
|
||||
|
||||
|
i have been running some el wire on a hilt that i posted a pic of recently, the inverter did make a whine, but it was faint. Any other background noise at all blotted it out. Putting it in a hilt quieted it down a bit as well, almost inaudible if i was holding it at normal arms length even in a quiet room.
|
|
#5
|
||||
|
|
||||
|
unless your running off like 30 volts and the endcap is off then you can hear the whine. but even at 18v you can barely hear it.
__________________
Darth Sequentius...Sith Lord ![]() Bringing light to darkness. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|