Not to derail the topic too much, but how on earth did you make the pommel? I've been wanting to build an approximation of the TPM Obi-Wan for awhile now, and the pommel is my stumbling block.Originally Posted by Luke-SkyMarcher
Not to derail the topic too much, but how on earth did you make the pommel? I've been wanting to build an approximation of the TPM Obi-Wan for awhile now, and the pommel is my stumbling block.Originally Posted by Luke-SkyMarcher
yeah dude please tell us, i wanna know toooo!!!
Darth Sequentius...Sith Lord
Bringing light to darkness.
Okay here's a short version. What you'll need is the following:
One of these
http://www.usplastic.com/catalog/pro...uct%5Fid=13324
In the 1.5" size.
Two of these:
http://www.usplastic.com/catalog/pro...uct%5Fid=21189
In the 1.5" size, and three in the 1.25" size (I used only two, but it would look more accurate with three) And three in the 1" size.
You will also need a 1.25" polywasher.
And it seems they are not carrying what I use for the square pieces. It was an extruded acrylic rod, and I used the 1/4" one. Out of this I cut six pieces 7/16" long.
Then you just have to superglue or epoxy it all together and paint.
Hope this helps you out.
-Luke
Those who have earned the right to boast have no need to.
Bookmarks