-
Blade emitter question
Just some idle thinking here, but......
will it be possible to tap the opening of one emitter and then screw another onto it?
I can think of a few very nice combinations of the emitters coming....
Reality often interferes with what would otherwise be an idyllic delusion.
-
Council Member
Jedi Council Member
-
are the 40" ones dimmer due to length?
I thought the reflector did a good job of "filling" out the blade.
You are right about the cutout ones....sure would make a 'purty' saber.
Reality often interferes with what would otherwise be an idyllic delusion.
-
Council Member
Jedi Council Member
-
-
-
This would depend on how often you remove the blade. The hex bolt is a good idea if you don't remove it frequently. I personally don't want to carry around a tool, so opt for the thumbscrew. At conventions, I tend to want to either put it on fast or take it off fast. On my Luke, I asked Tim to put it on the bottom of the main part of the emitter, near the end. I wanted it on the opposite side that the switch is on.
Zhi-don Aquintas
XO RL Sunrider Base
Treasurer/Head Instructor
Lightsaber training OCSWS
-
Flush fit set screw, keep the wrench in the hilt with a velcro strap.
Way to nice of an emitter to use a thumbscrew.
<center></center>
-
James;
Do you have any idea what would happen if that wrench got loose and started bouncing around inside a hilt? *Shudders* I spar way too much to take a chance on that happening. Yes, thumbscrews are ugly, but sometimes neccessary. Also I don't want to take my pommel off just to get a wrench to remove the blade. I want to do it fast. Turn the thumbscrew and remove the blade and I'm done. It's just a personal preference....no offense.
Zhi-don Aquintas
XO RL Sunrider Base
Treasurer/Head Instructor
Lightsaber training OCSWS
-
what would happen if the wrench got loose? all i can see happening is some clinking sounds in the hilt. just an observation.
i am a nerd, if you don't like it, i will cut you with my lightsaber
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks