-
Board Lurker
MHSv1 Nano Biscotte V4 Assembly questions
This is my first build and have a couple of questions.
1. I bought the prewired MHSv1 Nano Biscotte V4 Assembly and from using manual and online info I have got this wired up and working on the bench for neopixal. But there is a JST connector wired to Channel 2 and 3 and I don't understand what this is to be used for, if not needed I would like to remove but don't want to remove if needed for something I am missing or don't understand.
2. I wired up things in stages and when connected the switch LED across the DS pad and - pad with a resistor on the DS line per manual so switch light goes out in deep sleep mode. This seems to cause the saber to keep cycling what I believe are clash sounds. this wan't happening with just the switch part and not the LED part of the switch.
Any help or advice would be much appreciated.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks