Fits like a glove
The sides from the inside have a 1 inch opening the custom saber shop 1 inch led/heatsink plop right in from the inside of the saber. One side was a little too tight so I used a dremel to sand it open a little more. I then drilled and tapped 10-32 holes and used a set screw to keep it in place. I left it in my office, I’ll try and take pics and post them soon.
Im almost done wiring mine. I went with the Black series conersion kit and modified it to make it work.
Do you guys know if the Spark 2 can manage the original switch ON/OFF button already present on the hilt?
Damn I need to start ripping into mine... I have the chassis I just need to get the blade holders and led modules...
Post some pics guys please!
Do you mean the 1.25” sink tube blade holder? There’s no 1.5”
Hdjoe, Wich Chassis are you using? Custom made?
Actually, there is: http://www.thecustomsabershop.com/15...er--P1048.aspx
It is found in this section of the store: http://www.thecustomsabershop.com/Bl...n-MHS-C15.aspx
Got a question? Start Here. Have you tried the Thread Index yet? Most questions can be answered there.
Ah gotcha! Thanks
I've finally finished mine. Took me around 12 hours to convert. Pretty happy with the result.
Bookmarks