New saber I'm working on- haven't settled on a name yet, but here is a preliminary pic. Screen Shot 2017-08-03 at 5.18.40 PM.jpg
New saber I'm working on- haven't settled on a name yet, but here is a preliminary pic. Screen Shot 2017-08-03 at 5.18.40 PM.jpg
ok- some more pics- its finished now..... at least this version.........
build spec-
NB3- with standard sound fonts
RRW Tri Rebel
Base Speaker
Recharge port- drilled into the center hole of the pommel (sneaky)
raised illuminated activation switch
Custom painted- and weathered- Started with primer and then added a layer of red- then black- then metallic "aged copper" on top of that
clear coat after weathering (sanding with 600-1200).
Parts from the store-
Plain blade holder- Style 2- battle damaged
Main body hilt style 3 Also battle damaged
Pommel style 4 with cube ring
Sith logo around activation switch was salt water etched- then hand painted over the "aged copper"
dark/black lines are dremal-fu before painting- and then hand painted after the "aged copper" and before the weathering
Internal chassis were all parts from the store
Screen Shot 2017-08-09 at 11.39.10 PM.jpgScreen Shot 2017-08-09 at 11.38.08 PM.jpgScreen Shot 2017-08-09 at 11.38.19 PM.jpgScreen Shot 2017-08-09 at 11.38.35 PM.jpgScreen Shot 2017-08-09 at 11.38.45 PM.jpgScreen Shot 2017-08-09 at 11.38.55 PM.jpgScreen Shot 2017-08-09 at 11.39.38 PM.jpgScreen Shot 2017-08-09 at 11.39.54 PM.jpg
Last edited by Avidgrant; 08-09-2017 at 08:43 PM.
The aged copper has a rusty bloody look to it. Sithy.
Definitely has a unique feel to it
"But you are mistaken. I am no Jedi"
Bookmarks