I notice the switch wires are the the same color, does that mean there is no pos/neg?
Can I use one of these, but not illuminated?
http://www.thecustomsabershop.com/16...itch-P720.aspx
Yes, you can use that switch, but you can also wire the led in the switch to come on when the blade is activated by wiring it in parallel with one of the blade segments. Resistor appropriately, of course.
Got a question? Start Here. Have you tried the Thread Index yet? Most questions can be answered there.
No problem! Here's a visual reference for accent led wiring on these old boards:
The green(neg) and white(pos) wires go to the led in an anti-vandal button, like the ones in the store here at TCSS.
Got a question? Start Here. Have you tried the Thread Index yet? Most questions can be answered there.
Bookmarks