-
Sith Minion
quick question about micro USB...
I have had lots of help in the past when it comes to wiring. So I thought I come here one more time...
I am doing a mod on a prop for SDCC next week that will use my cell phone. (its the pipboy that came with the pipboy edition of fall out 4 last year). The problem is my phone will not last all day with the app going. So I want to put in a power bring inside the pipboy. But another problem is, standard micro usb connectors are two long. So I am going to have to make a low profile one my self. So I hacked one open last night. (finally getting to my question.) I know with usb cables there should be 4 wires. R,G,W,B I believe. The one I opened last night only had red and black. Is this a power only micro USB cable? I just don't want to re-solder anything and then fry my phone...
-
It could be. Were those two wires on the two outside pins? What pin they are connected to is much more important than the color. You can do a google search on "micro usb pinout" to get that info. Also, you should be able to find 6 inch micro-usb cables if you look around.
-
Sith Minion
I don't have the connector in front of me but from what I remember there were only two solder pads on the connector it's self... It just threw me off because I know USB also transfer data which requires two additional cables...
-
That's true. That being said, some of the USB cables that come with chargers only do the two power wires for cost savings.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks