-
CF V8 Wiring Check
Building my first saber, decided to go all in with the Crystal Focus V8. I edited Starkiller's wiring diagram for what I am planning to do. Please let me know if this is good to go.
starkiller wiring diagram Ray Version.jpg
Last edited by Ray; 04-07-2016 at 08:43 AM.
-
Youngling
-
Originally Posted by
Quixotic Jedi
Looks all correct to me.
Awesome! Thanks for the approval.
-
Awesome, this is the schematic I've been looking for! So I'm correct to think I won't need any resistors if following this setup with a Color Xtender?
Also, is the R.I.C.E. Port necessary for setting up the CF8? I was initially under the impression it was optional.
Last edited by Scyanix; 04-25-2016 at 05:19 PM.
-
Jedi Initiate
The RICE port just makes configuration more convenient. It's entirely possible to configure the board via the SD card. You won't need any resistors for your main LEDs with a CF + CEx.
-
Perfect, thanks for confirming, NanoRex!
-
Nice diagram- spot on and very clear. I'd go so far as to recommend this for a sticky.
Last edited by Marquis; 04-25-2016 at 07:21 PM.
Reason: sticky recommendation.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks