Your positive wire should merge with the main positive, not after the resistor for one of your main dice. Also if you want someone to check your resistor value you'll need to post the specs of your accent LED.
Nano, my accent LED is 3.3vf 20 ohm.
I am in a similar quandary. Am building my first saber and wanted an accent LED for a crystal chamber. My blade LED module is a Cree Star LED & MHSV2 Heatsink Module and the crystal chamber LED is a white 3mm bulb.
1. Can I wire the 3mm LED into the blade wiring?
2. If yes, would I need an additional resistor going to the 3mm LED?
I was looking at the diagram at the top of the page and got confused by all the wires coming from the blade LED. Any help would be greatly appreciated...Thank you
Bookmarks