Sweet!
Sweet!
Just trying to figure this out myself, I am converting a 2007 Hasbro A-RotS measureing 4.5v-2.65v (Red Cree XP-E2 CopperNova) =1.85 ohms so I should use a 2ohm resistor?
I have ordered a Ceramic Cement Resistor 2 Ohm 10W hoping that I was doing this right, but figured I should play it safe and ask, please let me know if i'm doing this wright and set me in the correct direction if I'm not.
Thanks for listening.
Welcome aboard. The calculation is correct; however, 10 watts is extremely large and much more than you would need (2 watts). Fine if you have room for it, just want to make sure you are aware.
末末末末末末末末末末末末末末末末末末末末末末末末末 末末末末
This was very helpful! Cheers!
Posting Permissions
Reply With Quote
Bookmarks