Originally Posted by
Halliwax
hello, i am a total newbie. i have been reading about FX sabers for couple months now. after seeing your thread Ronin, you went into such great depths of explanation it really cleared things up for me!
you also catergorising all the parts you used in the first page really helped me under stand by going back and viewing your parts list while reading through the thread. i actually read it twice from start to finish, the first read i wrote down some questions to paper to eventruly ask you in my post. but after the second read i found allot of my questions where answered! further proving all the great detail of information you have stored in this thread!!
i am totally new to this so i am hoping to copy your exact build, that why its fool proof to a novice like me. i JUST found the chassis parts you used which was one of my questions, i didnt notice it was in the MHS section. i have found almost all the parts you have ordered so far, and am little confused on the resistors.
i notice there was couple questions about the resistors you used, and you confirmed you had the right resistor. do you mind linking me to the correct resistor? i can't seem to find it, i am probably looking in the wrong place.
another resistor question i have, does it have to be facing a correct way when soldering into a wire? i remember when i tired up a old tractor for a friend the resistor had to face a certain why with a black line marking which direction?
again, i want to thank you and all have contributed to this wealth of information! i have been looking for a black series FX luke, but now knowing that i can build a graflex 2.0 to look like TFA I'm giving up my search and going to go this route. thank you all
danny
Bookmarks