Did you screw through both pvc pipes or did you just screw through the outer layer and use them as retention screws?
A hole in the outer layer for the screw to pass through, threaded hole on the inner layer. Since it's PVC you don't really have to use a tap to thread the hole.
A hole in the outer layer for the screw to pass through, threaded hole on the inner layer. Since it's PVC you don't really have to use a tap to thread the hole.
I'm about to build my 1st pvc saber....my 1st saber at that...I'm trying to avoid glueing pvc together if I can!
Bookmarks