-
First Lightsaber Build
Hello guys,
I'm new to the Lightsaber building and I have some questions.
1. What is the difference between an TCSS and Corbin Blades?
2. Will these parts fit properly?: http://www.thecustomsabershop.com/Me...yWishlist.aspx
SaberBuilder_render7.jpg
Hope you guys can help me with this.
killer3001000
-
Jedi Padawan
Sith Adept
Jedi Padawan
TCSS Blades have a diffuser tube in them, Corbin Blades have multiple wraps of film inside. Corbin blades are supposed to have more of a "core" look to them.
and I cannot see your wishlist from that link...
-
Thank you for the reply Cire Yeldarb.
Here's a new link to my wishlist: http://www.thecustomsabershop.com/Vi...3-9a686b5723da
-
Jedi Padawan
Sith Adept
Jedi Padawan
You'll want to add a C Clip to hold your pommel insert in place
You have the lens right, you just need to add the lens holder
If you want your switches' LEDs to light up you'll want to pick up a dyna-ohm resistor each, unless youve already sourced resistors elsewhere
You'll also want to make sure you have a resistor on your main LED
Is your "Drill & Tap Hole (8-32)" service for the Covertec or for the Blade Retention screw? You don't specify
Those are the only issues I see right now...
-
Alright, thank you very much for your advise!
I now updated my wishlist and it should all be right.
I already have enough resistors and I will drill the two holes for the Covertec and the Blade Retention screw myself.
Here's the updated list: http://www.thecustomsabershop.com/Vi...3-9a686b5723da
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks