-
ANH Blue from C/C/RB
Cyan/cyan/royal blue Luxeon tri-rebel on a 20mm star.
Royal blue and 1x cyan driven by the 4.5V Anakin ROTS board (2005) and the third cyan driven by a 700mA constant current circuit in parallel with the sound board, both wired to a DPST slide switch. image.jpg
-
-
Nice of you to say so. Thanks!
-
Did you put any resistors on this to get the color you wanted other than resisting the initial + out of the luexon
-
No, the MR board puts out about 900mA of constant current, and I used a constant current driver (think low voltage buck puck) on the third LED in place of a resistor.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks