Hello, for over a year I ordered the parts of my first saber and for many months I have not had time to work (besides trying to understand a lot of the concept for the realization with Google translator, and I sincerely thank all the members of that forum helped me !!). This is the project.
That will be a great looking saber once put together.
Only Thing I'm wondering about is how you will fit the 2 quite large swicthes, according to the sketch, they are at the same Position you have the PC... ?
Buon giorno Obi1! In fact you are right: according to the plan it would seem that the buttons are touching the card. It is actually aproximate, the board is located rearward toward the specker. Remain approximately 4 cm away. But the problem is that I wanted to complicate life: between the two buttons, but laterally to their axis, I drilled the handle to insert two accent LEDs!
Xenomorph almost completed!
In fact you are right: according to the plan it would seem that the buttons are touching the card. It is actually aproximate, the board is located rearward toward the specker. Remain approximately 4 cm away. But the problem is that I wanted to complicate life: between the two buttons, but laterally to their axis, I drilled the handle to insert two accent LEDs!
Posting Permissions
Reply With Quote
Bookmarks