Here's my part list, and following the list a few questions that need clarifications:
Hilt: 6" extension (double female) but with 6 No. Main Body Style 2 machined grooves, groove recesses black in colour
Pommel: Style 6
Pommel Inset: MPS insert style 1
Pommel Insert Retainer: 2 x MPS C clips
Choke: Style 3
Blade Holder: Style 9 drilled and tapped complete with 8-32 1/4" set screw
Heat Sink: New Style 2
Led/Heat Sink Screws: 2 x 4-40 Nylon screws
Thermal Transfer: Star Thermal Pad
LED: LED Engin LZ4 10W
Lens Holder: LED Engin Lens Holder
Optic: Collimator Lens 8.7deg
Activation Holder: Style 14 (Aux Switch/Rice/Recharge/Main Switch)
Activation Holder: 4-40 Button head screw
Main Switch: 16mm blue ring AV Latching (* unsure if these need to be short or long for use with activation holder Style 14)
Aux Switch: 16mm blue dot AV momentary (* unsure if these need to be short or long for use with activation holder Style 14)
Batteries: 2x18650 + PCB Protection and heatshrink
Sound Board: Crystal Focus V6.5
Extender: Crystal Focus V6 Colour Extender
Speaker Holder: MHS Holder 4
Speaker: Premium Speaker
Chassis: Chassis Discs Style 2 with holes
Chassis: 3x4-40 threaded rod
Chassis: 3 x brass 3/16" od tube
Chasisis 12 x 4-40 brass hext nuts
Charge Port: 2.1mm canon socket
Charge Plug: 2.1mm canon plug
RICE Port: 3.5mm Rice Port Style 1
Covertec Button: Machined button for covertec clip
Covertect Screw: 8-32 x 1/4" socket head (requires drill and tap hole in hilt)
Blade: 36" blade for duelling
Lube: Synthetic Grease
Milling/Drilling: drill and tap Holes in blade holder for 8-32 1/4" set screw
Milling/Drilling: Holes for AV Activation Holder Style 14 and 4-40 Button head screw
Milling/Drilling: drill and tap Holes for 8-32 x 1/4" socket head (covertec button)
Resistors: as required will source locally
Main question is regarding the switch holder Style 14, which AV switches are needed short or long?
Can Main body style 2 be used instead of extension piece? Wife wants smaller hilt so that's why I went with 6" extension wasn't sure due to AV switch holder above.
Thanks for looking all comments welcome.
Rough idea of basic saber hilt
Chuckies-Saber.jpg
Bookmarks