I've known of the saber scene for a while now, but only recently decided to out some effort and money into building my own. This will be a record of progress for my first project, and feedback would be greatly appreciated! I wasn't going to try anything too crazy for my first design, though, seeing as I don't have any sort of dremel or epoxy to work with at the moment. I intend on investing in both eventually! The following will be a few pictures to chart progress that I've made so far.
This would be my very basic humble beginning. All I really thought at the time was that I found my base and emitter piece.
IMAG0597.jpg
This would be the time I had(recently) bought another piece to cut and attach to my hilt, along with some O-rings and vynl tape.
IMAG0601.jpg
After making use of the previously mentioned purchases, I've left off here with my basic saber hilt almost done.
IMAG0603.jpg
Once I've made peace with the decorating of the hilt, I plan on purchasing a thick walled polycarbonate blade with a green tint and one of the shop's 1.25" sink tube blade holders to finish it off for a short while. Unfortunately, until I get some more spare cash, I can't use electronics to power my blade, but I definitely plan to later in the future using the Build Your Own Seoul P4 kit here on the shop.
Bookmarks