Wiring the switches to the PC-L

[Machinimax]

Yes. The aux switch MUST be momentary, but the primary can be either latching or momentary. You will have to change a setting in the config file for the primary switch type.

Yup I'm good now. This post is ancient lol. When I made this thread I was just beginning to plan my saber project. Now a year later, here I am finally building it! I was even able to get a CF.

Yeah no one needs to respond to this post anymore.

[Elim Vos]

Yes, I know that. My question was about the smaller switches,
Can they be used instead of the normal AV or guarded switches?

I'm planning out my next build and I want it to be "super slick", meaning
No obviious buttons.

[xl97]

Yes, I know that. My question was about the smaller switches,
Can they be used instead of the normal AV or guarded switches?

I'm planning out my next build and I want it to be "super slick", meaning
No obviious buttons.

Didnt you get the answer?

yes you can whatever switches you want... as long as they match the switch TYPE momentary or lathing for MAIN.. and momentary for AUX..

big/small, skinny/fat..your choice. as long as the switch TYPES match.

people use tiny/small momentary switches all the time.

[Machinimax]

Yes, I know that. My question was about the smaller switches,
Can they be used instead of the normal AV or guarded switches?

I'm planning out my next build and I want it to be "super slick", meaning
No obviious buttons.

Oh crud! I'm sorry dude! I only saw Silver Serpent's post and completed missed yours! Look like the guys gave you your answer though. Again, sorry about that!!

[Elim Vos]

its all good machini,
after re reading my post i kinda answered my own question.
I've seen some other work out there using "custom" switches
and i like the overall smooth look.
I'm planning to have recharge and rice port in the pommel and the speaker
t'wards the front, maybe.........

[Guardian Xentai Kaarz]

i need a diagram for the Prewired Petit Cruton with BuckPUck, momentary main and aux switches,white p4, 7.4v battery pack withspeaker, recharge port and RICE port

[Jabbas_reluctant_slave]

You don't need a diagram... You need to read more, post less and relax a little... same question in 3 posts in 20 min, your only 3 posts at that. I mean, WOW! Just use the search, read the manual and as stated before relax. You will be fine.