Here is one of my latest that is like a cross between a crusader, Vader and Anakin saber so I will just call it Templar (name change from The Defender). It has a petite Crouton sounc board with BespinII sound font. A Cree Cyan (more on the blue side) a rgb 5 mm LED for the crystal chamber, (I used the green and blue and resistored the blue to make it match the main blade LED) a blue ring and a blue dot AV switch and a .86" speaker. The ID in the grip section is only 1". The grip section is all one piece, the simulated t-grips are machined into the hilt. Most of the parts are threaded, only the pommel and the section above the grip choke are not threaded. The SD card is accessable by removing the pommel, sliding out the speaker and using a pencil eraser to eject the SD card and use needle nose pliers to remove it. It is easier than it sounds. I will probably end up putting resblade as the sound font for this saber. Anyway here is a video and some pics.
Bookmarks