Hey all,
This is my first saber project, I started it last March or so, and it's been on hold for about a year, now.
I've updated the battery system and built a sled, sound chamber, and recharge port.
MHS: Hilt 4, pommel 6, pommel insert 12, blade holder 9, choke style 1 short.
Copper Jacket Metallic powder coating
Battery Pack: 2x 3.7v li-ion 18500s, 4.2 amp polyswitch fuse, 7.4v 2 cell PCB
2010 obi wan sound board.
Here is the basic circuit completed, using 4AA NimH, and no 5v regulator.
http://smg.photobucket.com/albums/v2...0920101300.mp4
This is where I stopped at last year.
--------------------------------------------------------------------------------------------------------------------------------
Yesterday I got back at it, and after a few trips to home depot, lowes and radio shack, I started sanding down the soundchamber and measuring the blade material for a sled.
We got the holes drilled into the sled (saber blade from the hasbro), and all of the soldering done for the regulator, plus added a new quick disconnect to the switch.
Bookmarks