Single it is, folks...
I decided to take a break from cutting metal and work with something a bit warmer..
Here I have spent an evening carefully measuring and cutting out the window for the photo, and recessing the back for the glass and such. I also spent a good deal of time deciding how I want to mount the signature plaque.
I will remove the plastic bit with the signature from the luggage tag, and cut the hole and inset it like the photo above. The corners are radiused at 3/4 inch, and I'll run a router around the edge to radius it at 1/4 inch.
Here it is before gluing, I have my edge slots cut with the router for the plaque, I need to cut t he lower rosewood block to allow for the plaque.
Next after that is routing a radius into the outer edge, and a smaller radius into the insets.
Bookmarks