-
-
Jedi Master
Cool, let us know how it turns out.
-
Jedi Council Member
-
#1 - do you mean how will i attach the wires from the blade itself to the connector?
#2 - i tried doing that with my crystal chamber but the space between the chamber and Switch is really short. So i just loosened one retaining clip (letting extension spin freely) on opposite side of the chamber , screwed extension into the hilt, then tightended clip. So i figure the same method will work here but leaving the clip on the connector loose all the time. The blade being very snug and having retension screw in it , will keep it from moving.
-
Thats the idea that most use for removable strings.
A lot of people use round plugs though, but this should work just as well.
Click here to learn all about me!
The Shoutbox: The only place you can double post!
Anybody who spells it Lightsabre is dyslexic
"Yeah, if I had Skotts face I'd hit it too" ~ Fenderbender
"You didn't buy a toy saber just to break it. You bought an economy sound card with a really complicated wrapping scheme." ~ Silver Serpent
-
Jedi Council Member
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks