I get a 1" washer with a 1/4 hole in it (hole doesent matter) then lined up the LED on the washer and drew a dot where i needed to put the screw holes. then i Used a #6/32 drill/die to drill/thread the holes. I then put in two #6/32 nylon screws (you could find at fry's) and used a grinder to make space for the wires.
like so:
http://smg.photobucket.com/albums/v2...3/LED%20mount/
ps sorry the steps are all mixed up just look at the tital number
Bookmarks