You can use a pololu board in a soundless stunt, but use the other version for the higher voltage, the SV version instead of the LV.
For your clash sensor in your Graflex, try hot gluing it to the actual sound board. I do that on all of the MR boards I use, an it work very well. Another option you have if you want to try it, is to rewire the board completely, like shown in this topic:
http://forums.thecustomsabershop.com...ad.php?t=10789
For your speaker, you can try making a resonator for it using a 3/4" pvc coupler from the hardware store. The ones my local one carries have a beveled edge that allows the speaker to fit right into it making it easy to hot glue it in place. I have an old topic around here somewhere that shows this.....Here's one:
http://forums.thecustomsabershop.com...ead.php?t=3059 Here's a better one (Wow, all the way back to my first ever build topic!) :
http://forums.thecustomsabershop.com...?t=2190&page=2
I also just used one of these in a Qui-gon Jinn replica saber I have running an MR board and a plastic Radio Shack momentary switch, and it works like a charm! Thanks to member Troyo for posting this find in the first place!
Bookmarks