This is going to be my first saber. As per J-Lo's suggestion, I'm posting a parts list so I don't screw myself over by buying the wrong thing. So here goes. Oh and I should give credit to PhoenixReborn for all his help compiling this list! So without further ado, here goes:
1000mA buckpuck
8.7 degree lens
Rebel LED green
Rebel lens holder
Rebel shim
4AAA battery holder
Guarded switch
1/8 heatshrink
Pommel insert
MPS clip
Pommel
5" extension
Ribbed extension
Blade holder
Blade retention screw
A bunch of drill and tap stuff. Retention screw service, Covertec clip service, switch hole service, activation box service.
That's another thing. The activation box is not a functional piece. it's purely for aesthetic purposes. It's not available in the MHS Builder, so I drew it out in MS Paint to what I figured the appx dimensions would be.
Also powdercoating service of course.
Any help would be hot!
Bookmarks