DJ asked me to build him a custom pvc saber, this is what I came up with. He just asked me to paint it gloss green and black, with a p4 green led and a green AV switch. The main body is 1" pvc. The grips and 1st layer of shroud is 1 1/4" pvc. The outer layer of shroud is an 1 1/2" pvc. It has a p4 green led, a resistor, green ring AV switch, 4 AAA batteries, and the new translucent white 1" thin walled blade with 6' of cellophane in it. To get the AV switch to fit into the 1" pvc I had to stack a piece of the 1 1/4" and
1 1/2" pvc along with the AV switch bezel. Instant pvc switch box.
Bookmarks