Well that is a very good question - to me it seems reasonable to spend the extra $5 for the driver board (blasted RED LED's =) ).
Seem like a good idea to the experts out there?
Well that is a very good question - to me it seems reasonable to spend the extra $5 for the driver board (blasted RED LED's =) ).
Seem like a good idea to the experts out there?
Stryder says go, and he knows everything. He made/commissioned the 1400mA board. Hooray for the shoutbox...^_^
(PS - check the resistor chart on the shop, the red you want might draw as much as 1525mA; in which case, set it to 1500mA and rock it out.
PPS - expect to chew through batteries with a vengeance, that's a LOT of juice)
Last edited by Tyhm; 06-04-2010 at 11:30 PM.
It's not supposed to be cheap or easy. It's an ordeal.
But if you're not here to make a light saber the hard way, just follow this guide and stay out of the way.
If you're lost, here's a directory of all the most pertinent threads - it'll save sorting through the rubbish, thank the mods for braving it for us.
If you have a question, there's a solid chance it's answered here. Not too much to ask you to check ONE page for your question before posting, is it?
Posting Permissions
Reply With Quote
Bookmarks