I am going to see if the toys r us has it in my area, if they do I will put a meter on it tonight and let you know.
EDIT:
I have tested an Anakin with a 4.5 V set up (3 akaline batteries and a dummy battery in a 4 AAA pack) I was very disappointed with the results. I tested it with a blue Cree LED. Each of the stock LEDs had an individual circuit ran to it and hooked up to the Cree here are the results:
Circuit 1: 35 mA
Circuit 2: 34 mA
Circuit 3: 35 mA
Total with all 3 circuits tied together : 104 mA
So, even though the board has decent sound you will need to use a supplimental driver. I still think it is worth using though.
Bookmarks