-
Screws, check, easy, any drilling or anything like that required (obviously i will for the d clip but what about the blade retention screw?). Thanks heaps for your help. Actually what sort of screw do i need for the blade retention one.
http://www.thecustomsabershop.com/10...rew--P180.aspx
this one?
Last edited by theguitarist; 05-23-2009 at 08:23 PM.
-
-
Sorry i missed that one.
Thanks heaps for all your help!
Sorry to pound with questions but will blade holder 17 (http://www.thecustomsabershop.com/Sc...e-17-P417.aspx) hold a blade well, it doesnt look like it has much to hold the blade in.
But thanks heaps for your help, i knew i would of missed something if i didnt ask.
-
-
I'll play it safe and go with 12. Thanks heaps for all your help, it's much appreciated.
-
Council Member
Jedi Council Member
-
First, don't worry about missing something with an order. It's gonna happen. Don't worry about putting things together and then realizing you don't like it or it's not quite functional. It's gonna happen. My input on any of the MHS products is that the owner of the store puts his parts together well. You don't have to worry about bad workmanship or poorly functioning pieces coming from Tim. He's been in the business for a while now and I'd bet a paycheck that he puts his stuff through the test before releasing them to us.
-
only sugestion i have it to use the MHS builder. that way you are only posting one link.
The measure of true wisdom is the ability to entertain ones idea and not except it as your own.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks