-
-
Do what I did, pick up a chunk of BASS wood from the hobby shop, wood shop or craft store. Download the plans for the phasers
http://www.racprops.com/issue4/class...er_blueprints/
Print the plans to scale, then glue the side section onto the wood and carve and sand the wood to match the side view. The glue the top view on to the carve and sand the block to match the top view.
I have a band saw that does most of my carving. A jig saw, or coping saw would work also.
Finish sand to suit your tastes, laquer and sand to a smooth finish, then add detail parts and paint.
_________________________
Nyow!
/
=^o^=
-
now thats a good idea! Well, at least it beats the idea i didn't have before you said it. Do you know i place i can find similar prints for the phaser rifles and the later stuff? I've been looking for the past three hours?
Tim
-
There are small images on the web that you might be able to enlarge.
LDS suggested the tech manual. I would imagine there is a similar manual for Next Gen.
Just Google image phaser or phaser rifle and see if you can find an
image that you can use as a plan.
A run through here can always be useful.[]
http://www.ex-astris-scientia.org/
And for more on some build ups, these guys are good
PVC Blasters[8D]
http://www.imperial-fleet.com/BBC/
_________________________
Nyow!
/
=^o^=
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks