2 resistor-driven Seoul P4's in an unlit room.
2 resistor-driven Seoul P4's in an unlit room.
P4 Mr driven ultrablade
flash then no flash
no blade
Purple tcss + Lee filter 704 lily
Both tcss pinks
Tcss light green + 2 Lee 100 spring yellows= tiger green gatorade
"The Dark Side offers power for power's sake. You must crave it. Covet it. You must seek power above all else, with no reservation or hesitation." ~Darth Revan~
Seoul P4 white
1000mA buck Puck
4AA
The Blade:
34 inch thin walled polycarbonate
Cellophane wrap inside
Sanded outside
Rounded tip with hole drilled into center of reflective aluminum disc
DSCN1623.jpg
DSCN1626.jpg
DSCN1630.jpg
DSCN1631.jpg
See full description on saber here
Last edited by vargose; 12-23-2008 at 08:34 AM.
I was playing around with my Lee swatch book this weekend. Found some neat colors. Seoul P4 running on a 1A buck puck. Dual film blade. (2X Corbin film & 5' of gift wrap.)
For comparison of brightness, all photos were taken with the same camera settings. (For those who are interested, f3.2, 1/30 sec, 400 ISO, no flash.)
The Oklahoma Yellow is what I normally run in my brass saber. I find it's a nice, rich yellow.
The Spring Yellow has a hint of green in it, and is a little brighter than the Oklahoma yellow, but paler as well.
The Jas Green in person is the coolest lime green color. It's almost the color of Mt Dew.
Although it's called Fuchsia Pink, it's actually a nice purple.
There are more colors I'd like to try. Stay tuned. If you have any questions, PM me. Don't post in this thread.
Edited to add another picture.
Last edited by Obi-Dar Ke-Gnomie; 01-09-2010 at 07:31 PM.
Seoul P4 white-TCSS thick wall tubing... i wanted to make a single handed hilt...short as possible...so i had to put the switch in the end pipe cap to save space..im gonna shorten the blade too to make it more like a short sword or wakizashi blade. The spiked brass blade retention screw is actually from my tattoo machines...perfect fit, if not a little long, but easy to change, and individual style is a consideration.
Last edited by Lord Maul; 12-22-2008 at 12:20 PM.
http://i21.photobucket.com/albums/b2...shinobiwan.jpg
My Little SHINOBI-WAN ...John-Paul shinobi Connelly
A lux III
with a 4 AAA batt. pack
CF soon to come
With flash and light on.
Without lights/flash on.
Last edited by Lord Maul; 12-23-2008 at 06:14 PM.
Falling to the dark side,
i have gone to far. Now sarrow
sings softly and sweet. Will i be saved
or forgotten like rest?-"Col-Vin-Lune"
white k2 run off hasbro econ board with clear thick walled blade
TCSS white difuser and 10 degree lens and TCSS color disc
white k2 run off hasbro econ board with special white thick walled blade
10 degree lens and TCSS color disc
white p4 run off US 2.5 board with clear thick walled blade
TCSS white difuser and 10 degree lens and TCSS color disc
white p4 run off US 2.5 board with special white thick walled blade
10 degree lens and TCSS color disc
white p4 run off US 2.5 board luxIII overdrive with clear thick walled blade
TCSS white difuser and 10 degree lens and TCSS color disc
white p4 run off US 2.5 board luxIII overdrive with special white thick walled blade
10 degree lens and TCSS color disc
"You are a Jedi who never knew what life was until it ran out in a big gush over your lips."
<ARKM> "May you come to the attention of those in authority"
same white p4 as my last post side by side with the new White Rebel
white P4 rebel.JPG
p4 on left Rebel on the right same TCSS white thin blade both have a freshly charged 3.7v Lion.
Last edited by thejedilestat; 08-20-2011 at 02:28 AM.
"You are a Jedi who never knew what life was until it ran out in a big gush over your lips."
<ARKM> "May you come to the attention of those in authority"
Bookmarks