Okay, im building a saber and this one im going to put sound in. i bought a broken yoda and only can afford one shot at wiring this thing. could someone post a list of parts needed or a tutorial for dummies?
Okay, im building a saber and this one im going to put sound in. i bought a broken yoda and only can afford one shot at wiring this thing. could someone post a list of parts needed or a tutorial for dummies?
Did you try a search? Here's what a search for conversion brought up.
http://forums.thecustomsabershop.com...ght=conversion
If you're Yoda board is different, then just post a pic of it. Most are fairly similar so I wouldn't imagine you're being much different.
im putting the yoda sound into a mhs built hilt
Dude, you may take a little heat for this post! Read through the MR-3w tutorials to get some ideas, then post a pix of the board. There is a disassembly thread at Fx-sabers so you can take it apart without fubar-ing it.
The disassembly thread here is not useable, so you may not get flamed after all! Muuuahahahahahahaha
Seriously, check out the thread at fx, then take yours apart. make sure to drill the pin holding the clash sensor out or your clash sensor will be D.E.D.
Last edited by Lord Dottore Matto; 12-12-2008 at 06:08 PM.
All n00bs READ these first (PLEASE)!!!:1. LDM's Basic Saber-build Step-by-Step Tutorial 1A. Maul's Saber Dictionary 1B. THREAD INDEX 1C. Econo Sound Diagrams
TCSS the #1 Part supplier of LDM customsabers!
Glad to see that I am not the only one who gets shots fired at them. LOL
“He's a friend from work.”
Bookmarks